Fronius product quality Exceeds all standards

Top quality

When it comes to reliability, sturdiness, and standards, you are not willing to compromise. You want welding systems that will remain faithfully by your side as you tackle the harsh day-to-day realities of welding work.

Look no further! Since time immemorial, we have been developing welding systems that do not just comply with all standards and requirements but actually exceed them. Our secret? In-house endurance tests that put our products and solutions through their paces time and time again while making them work longer and harder than in everyday life. No need to thank us, it’s just what we do.

Very long service life Perfectly designed for industrial applications with a service life of ~ 30,000 h (40% duty cycle and 25°C ambient temperature).

Tested for sturdiness and reliability iWave power sources have to undergo eight endurance tests. As a result, the sturdiness and reliability of our systems is assured.

IP 23 protection Suitable for outdoor use

Works with all mains voltages One system for the entire voltage range from 200-600 V (only applies to iWave 300i-500i)

Generator-compatible Our systems can also run off a generator.

Shock- and impact-proof plastic housing

Display protection Protective cover on control panel plus a lowered and inclined design to protect against mechanical damage

Very long service life

Perfectly designed for industrial applications with a service life of ~ 30,000 h (40% duty cycle and 25°C ambient temperature).

Tested for sturdiness and reliability

iWave power sources have to undergo eight endurance tests. As a result, the sturdiness and reliability of our systems is assured.

IP 23 protection

Suitable for outdoor use

Works with all mains voltages

One system for the entire voltage range from 200-600 V (only applies to iWave 300i-500i)

Generator-compatible

Our systems can also run off a generator.

Shock- and impact-proof plastic housing

Display protection

Protective cover on control panel plus a lowered and inclined design to protect against mechanical damage

Product quality tested 8 times over

Although trust is good, testing is better: all our welding systems undergo a precisely defined set of endurance tests. In fact, our products have to prove themselves eight times over before they are even allowed to leave our factories. We have made it our aim to test our products well beyond the limit values required under the relevant standards (IEC 60974-1/-3) – and ensure they pass!

Summary table of endurance tests

METHOD	DESCRIPTION	TEST OBJECTIVE	FRONIUS QUALITY
Impact test	Hammer blows with an impact force of 10 Nm at defined positions	Housing must be impact-proof, particularly when used on construction sites	3 points per side instead of 1 (as required by standard)
Metal dust test	A fan blows fine metal dust onto a system	Housing must remain impervious in dirty environments	Additional test (not required under standard)
Low temperature performance	Extreme fluctuations in temperature and humidity	System must be able to withstand harsh environments	Tested down to -40°C instead of -10°C (as required by standard)
Drop withstand	System dropped onto a hard surface from a defined height	Housing stability, breaking strength, and electrical safety	Tested from a height of 250 mm instead of 100 mm (as required by standard)
Salt spray test	System exposed to a highly saline spray mist for several days	System must be resistant to corrosion, particularly near the ocean	Additional test (not required under standard)
Moisture test	System sprayed with water	Protection of housing to ensure functional reliability and user safety	43% more moisture than required for a period of 76 h (93% instead of 50%)
Vibration test	Extreme vibrations	System load capacity	Additional test (not required under standard)
AC duty cycle test			At higher frequencies up to 250 Hz and with a defined hosepack: Impedance (40–50 uH) instead of the required factory setting of 60 Hz

Service quality

A partner you can rely on the world over

We have always successfully lived up to our aim of offering first-class customer service for welders. We have an active worldwide presence – thanks to our global sales and service network, which includes 34 international Fronius companies plus our Fronius Service Partners, sales partners, and representatives in more than 60 countries.

24-hour online customer portal

Service whenever and wherever you want it: myFronius offers round-the-clock access to all relevant documents and information for your Fronius products, and all in one central place. On the online customer portal, you will find everything you could possibly need to help with everyday welding tasks – from 3D data and instruction manuals right through to the spare parts catalog.

back

The current page does not exist in the target language.

Perfect Welding